Sans Soucie
Art Glass Studios, Inc.

Since 1976

Our Blog

Archive for the ‘Glass Facts’ Category

Frosted Glass, Inside & Out!

October 22nd, 2009 by lgannett – Comments (0)

etched glass pattern frameless doors shredded

INSIDE View. Jagged Peaks all glass doors.

OUTSIDE View. Jagged Peaks, all glass doors.

OUTSIDE View.

What a difference a VIEW makes!

The main factor that will change the viewing appearance of any of our etched, carved or stained glass is one thing, and one thing only:  LIGHT!   And in the case of our art glass, being ARCHITECTURAL Art Glass primarily illuminated with natural sunlight (which, by the way is really the best form of lighting for it), is the time of day, and whether you’re viewing from inside our outside!

As you’ll see in the examples included in this blog, glass and the artwork applied to it will take on a completely different effect, depending on how the light is hitting it.

The most obvious difference comes when the glass is viewed from inside or outside of the home or building, and whether it’s day or night, the factors change again.  Colors will change, details in the carving will stand out and the visibility thru the glass will change as well.  One of the best examples we can give you is the “Jagged Peaks” all glass doors.  These doors were photographed in the day, are ½” thick bronze glass, and have been sandblasted with a frosted pattern on the outside surface.  From the outside, the glass takes on a dark brown hue, and creates a nice level of privacy when looking in.  Viewing the glass “from the inside out”, it looks completely different.  The glass almost appears clear, but if you were to look at “clear” glass side by side, you’d see the difference.

frosted glass doors window geometric out

"Sun Odyssey", viewed from OUTSIDE.

frosted glass doors window geometric in

Inside View

When viewed at night, the opposite becomes true.  The glass is illuminated from the inside, and so when viewed at night, as you approach the door, you would be able to see IN to the house or building.   The same rings true, even on clear glass.  Viewed at night from inside the house, the glass will appear darker and take on a different look.  It’s really one of the great things about glass .. light changes everything and the art glass will have a different look depending on the time of day you’re viewing it.

Visit our special Effects & Techniques page on our web site, to read more about the different types we use that create different looks.   We found a very interesting web site called GlassFacts.info that you might also be interested in.  Another interesting article is Glass Facts, the History of Glass.

etched carved glass squares pattern doors

"Squares Pattern", grey glass, viewed from OUTSIDE.

etched carved glass squares pattern doors inside

Inside View

A little history: Sans Soucie’s beginnings

September 9th, 2009 by lgannett – Comments (0)

vintage ss5

2 of 4 Tiffany windows reconstructed

After writing the last blog about stained glass, I got to thinking about some of the beautiful, original work done by Sans Soucie and its beginnings, which prompted me to ask Chauncey’s Mother, Bonnie, to share a little bit about the history of Sans Soucie, how things got started and if there were any particular projects or pieces that stood out in her mind as she reflected on the “early days”.

“The original start-up business  was called ‘Classical Glass’ and started  in our garage, in Newport Beach, in 1974.  Sans Soucie Studio began work in the hi-desert of California, in Pioneer Town, 1976.  Moving from a barn on Pipes Canyon Road to a glass front shop on the 29 Palms Highway that many locals will remember because of the big white “tipi” that sat in the front parking lot.  The County offices never could find a restriction to cover that placement and so the tipi remained until some member of the Agua Caliente Tribe purchased our tipi.  Of course they didn’t know how to put it up.  The Cahuilla never used tipis.

vintage ss3

Commissioned by "Save the Whales" Foundation, Long Beach, CA

Yes, the only focus in the beginning was classic leaded glass panels and lamp shades of various beveled, hand blown antique glass and Tiffany opalescent, still made by the same factories that Tiffany commissioned. (Stained being something entirely different that we only came close to duplicating with air brushing some years later).

For neophytes, the very first project, in 1974,  was one of the finest, most intricate and complex that we ever did.   A huge dream commission that consisted of two entry side lites measuring,  approximately  4′ x 8′  on each side of massive wood entry doors. It was an intricate floral design of vines, leaves and beautifully shaded opalescent flowers.  I went absolutely crazy at Hollander Glass in Long Beach, selecting the glass.  The windows were so heavy that they had to be braced with steel rods, heated and bent to conform to the vine pattern, braced across the panels.  Doubt that we made any money on the job but it was a  wonderful first learning experience.  vintage ss7

Several other jobs come to memory from either sheer size or sheer prestige.

In 1975, while visiting for a wedding in Canada, we were commissioned to do an entire kitchen ceiling.  The pattern and colors mimicked the hand painted floor tiles in rich tones of gold and purple.

Vintage SS Houstin Jul 81

Room Divider for Rusty Pelican Restaurant, Houston TX

For Jack Knox, (< see page 10 of pdf download)  (Jack was always incredibly good, not only at providing work for us, but allowing us free creative expression), we created a round master bedroom window/headboard of Peacocks and Peonies, installed in the front exterior wall of the home.

The very ultimate was a custom beveled entry for the Rusty Pelican Restaurant, Newport Beach, a design of huge flying Pelicans commissioned by the RayGal Design firm that I designed.

Chad (who still assembles the majority of our stained glass pieces today), leaded both of those projects in the 80′s.   He also re-constructed a 4′ x 8′ Tiffany commissioned piece, taken from a home in Pasadena, California.

vintage ss6

“Stained glass” took root in Cathedral windows after the middle ages.  As I recall the history, the formulas for making richly colored blown glass was lost during that time we know as the dark ages. The antique glass could only be mimicked by hand painting clear glass with colors that were then fired to “stain” the glass.  There are still a few old glass houses around the world that specialize in “stained” glass.  We visited one such work shop in Paris that had been in multi-generation operation.  Both here in the US, and in Canada, there are a limited number of companies that specialize in the repair and reconstruction of old stained glass windows. Clients have to wait years for work.  The unique beauty of a  “Chartres Cathedral” is the jewel like gleaming of the original “antique glass” made with ancient formulas of lead and arsenic, but the glass is hand cut and hand leaded using the same process that we use today.”

Positive & Negative Sandblast Techniques

August 28th, 2009 by lgannett – Comments (0)

At Sans Soucie, we use a variety of different sandblast effects and techniques in our work.  For the most part, the pieces we create are achieved through what’s called “multi-stage sandblasting”, where the design elements are carved, one small part a time, layer upon layer, achieving a multi-dimensional effect in the design.

This grape cluster and leaves are a "multi-stage" sandblast.  Each grape has been sandblasted one at a time.

This grape cluster and leaves are a "multi-stage" sandblast. Each grape has been sandblasted one at a time.

A more common technique used in sandblasted glass, is called a “single stage sandblast”.  It’s “one stage”, in that the entire template is cut and all the elements or portions that will be sandblasted are removed at the same time, then the entire surface is sandblasted at the same time.   Within this technique, are two “effects” or finishes:   They’re what’s referred to as  a “postive” or “negative” sandblast.

The positive sandblast is where the elements within the design remain clear glass and the background area of the glass is solid etched.

Obviously the negative sandblast provides for obscurity and so this technique is used for the majority of products like pantry or door glass where privacy is desired.

Cabinet Glass.  Left door glass is Positive, right is negative.

Cabinet Glass. Left door glass is a positive sandblast, right panel is negative.

"Pegasus" door glass design.  Negative sandblast.

"Pegasus" door glass design. Negative sandblast.

"Pegasus" door glass design, positive sandblast.

"Pegasus" door glass design, positive sandblast.